How Broad Oak Paving Will Lay Your Block Paving

Preparation-our approach to getting your job done

Preparation is the most important aspect of the job as this determines the quality of the finished product

The outcome of the job is only as good as the preparation work done prior.

The Steps We Take

block_paving_construction how_we_lay_blockpaving

Step 1
Mark out the area to be paved and remove all the existing surfacing to a depth so that the finished level is at least 150mm (2 bricks) below the damp proof course. For drainage purposes create a 1:80 slope during excavation that runs away from any building or fence.

Step 2
Install any manhole covers, drainage channels and edge restraints as required.

Step 3
Fill the excavated area with at least 100mm of Membrane Type One sub-base material and compact well with the plate vibrator, filling voids with sharp sand.

Step 4
Spread sharp sand to a depth of 50mm, compact it with the plate vibrator and spread a further 15mm of sharp sand over the area as a loose screed and level correctly.

Step 5
Lay one course of blocks on the sand along all edge restraints.

Step 6
Lay the blocks hand tight only, with a joint gap of 2-5mm, starting in one corner and at the bottom if there is a slope. Lay blocks from at least three packs to ensure even distribution of colour. Cut in at edges using a block cutter or bolster chisel and club hammer.

Step 7
Sweep the area thoroughly, particularly if a block cutter has been used. Replace any damaged blocks.

Step 8
Compact the whole area with three to four passes of the plate vibrator in perpendicular directions and overlapping.

Step 9
Sweep Jointing Sand over the entire area, ensuring it gets into all the joints between blocks. Jointing Sand should not be applied in wet weather, as it will not fill the joints properly.

Step 10
Fill any gaps which appear in the joints and vibrate the whole area again. Repeat until there are no gaps and leave any surplus sand for the wind and rain to wash into joints as they settle.

Call: 0800 0463380 or 01892 882601, or 07501 215273 today for a FREE consultation from Broad Oak Paving Ltd, a firm of experienced Block Paving Installers specialising in laying good quality driveways and patios across:

  • Hastings
  • Maidstone
  • Eastbourne
  • Tunbridge Wells
  • Surrounding Areas.

Remember! All work is guaranteed for 10 years no payments will be requested until your project is satisfactorily completed.

Areas We Serve

  • Maidstone
  • Tunbridge Wells
  • Hastings
  • Eastbourne
  • Surrounding Areas
Joomla Template: from JoomlaShack